(4259) Picatinny 45 degree Offset mount with DOCTER footprint.
The Picatinny 45 degree Offset Mount with DOCTER footprint makes it possible to place the Red-Dot sight with DOCTER footprint ,such as the Docter sight 2 and 3, at an angle of 45 degrees next to your weapon. This mount is suitable for mounting on a picatinny rail.
Supplied without M3.5 screws, you must use the screws that came with the Docter Sight.
This mounting is also suitable for Red-Dots with an equal bottom plate (footprint) such as:
ADE Advanced Optics RD3-002
ADE Advanced Optics RD3-006A Huracan
ADE Advanced Optics RD3-006B Huracan
ADE Advanced Optics RD3-009 Crusader
ADE Advanced Optics RD3-012 Delta
ADE Advanced Optics RD3-013 Bertrillium
Athlon Midas TSR1
Doc Sight C
Doctor Sight II Plus
Doctor Sight III
Docter QUICKsight 5.0 VR
Hex Dragonfly
Leica Tempus
MAK dot 1×25
Makdot SH
Meopta Meosight IV
Noblex Sight C
Noblex Sight 2 Plus
Noblex Sight III
Noblex Sight G
Noblex QUICKsight 5.0 VR
Sightmark Mini Shot M-Spec
UTG OP3 Micro
Vector Optics Frenzy 1x17x24
Vomz Pilad 1×20
Vortex Viper
Vortex Venom
The Red-Dot sights below also have a Docter/Noblex-Footprint, but the screws supplied with this Red-Dot have a different size that are not suitable for a Docter/Noblex mounting standard.
You can mount these Red Dot sights on this adapter, but you cannot use the screws supplied with the Red-Dot, you must purchase the thinner M3.5 screws.
Burris Fastfire 2
Burris Fastfire 3
Burris Fastfire 4
Delta Optical MiniDot
Delta Optical MiniDot II
Hawke Reflex 1×25
Sightmark Mini Shot Pro Spec
US Optics DRS 2.0
US Optics DRS 2.0 Enhanced
Vector Optics Frenzy 1x20x28.